Guillotine Shears

8
High-quality hydraulic plate & guillotine shears
Categories
Reset filters Show items
Show on map view
CIMATIC QC12Y-6X3200 Gullotine Shear
shape
EHT EHS 10-31 Guillotine Shear
shape
ARRIETA A H-20 Guillotine Shear
shape
Spain, 30870 Mazarrón
ARRIETA A H-20 Guillotine Shear
DURMA MS 2504 Guillotine Shears
shape
Bulgaria, 1346 Sofia, s. Voluyak
DURMA MS 2504 Guillotine Shears
BBM PROMACA DLB-4/3050 Guillotine Shear
shape
PROMECAM GH 630 Z GUILLOTINE SHEAR
shape
France, region Haute-Savoie
PROMECAM GH 630 Z GUILLOTINE SHEAR
DIGEP OLH 8x2050 Guillotine Shear
shape
Play
Plate shears
shape
Germany, 6847 Dessau-Roßlau
Plate shears

Guillotine shears (power squaring shears) are the best choice for fabricating sheet metal as they ensure long straight cuts. Guillotine shears are available in various sizes, from the manual shear to the hydraulic machine with a 15 m bending length and a CNC-controlled back gauge. Some sheet metal processing machines can be used to enhance the functionality of guillotine shears. In this way, the cutting edge produced by the guillotine shears is brought into the desired shape with a press brake. There is an impressive selection of used machinery at Surplex. In addition to guillotine shears and press brakes, you will also find other used machinery at top conditions!

Guillotine shears are used to separate sheet metal along a straight line. Also known as a squaring shear or a power shear, a guillotine metal shear can be manually powered by foot, mechanically powered or hydraulically powered. A guillotine shearing machine clamps sheet metal in place with a ram. A moving blade is then lowered across a fixed blade to shear a metal workpiece accurately and efficiently. The blades spin in the opposite direction to ensure a clean line.

  • Chip-free method to separation metal workpieces
  • Fragmenting of sheet metal along a straight line
  • Guillotine shears are very important for the processing of sheet metal
 Quality   Great offers   Personalized

A larger guillotine sheet metal shear may have a moving blade that is set at an angle in order to separate the metal gradually, from one side to the other. This decreases the amount of force required, and it provides a method of sheet metal processing that results in fewer chips and inconsistencies.

A hydraulic guillotine shear is the preferred option for large-scale manufacturers, as it eliminates the need for making continual adjustments and corrections during the process. A combination of blade design, a heavy-duty frame and a CNC-controlled programme ensures total precision and control over workpieces. The average hydraulic guillotine shearing machine today is made with lightweight materials which increase the likelihood of deflections when cutting. To ensure accuracy through the process, a computer program can make adjustments to both the rake angle and the blade gap.

A sheet metal guillotine shear consists of a shear table, upper and lower blades, a gauging device and a work-holding device.

WIEGER Guillotine shears in use

The workpiece rests on the shear table whilst it is being cut. The work-holding device locks the sheet metal into place to ensure it doesn’t move or buckle under the stress caused by the cutting process.

Whether a manual, pneumatic or hydraulic guillotine shearing machine is being used, the sheet metal lies between an upper and a lower blade. The upper blade is gradually lowered, and the metal in between is ‘sliced’ with a high degree of precision. It is the gauging device that ensures the cut is made in exactly the right place.

In the past, the cutting process was powered by foot or by hand. However, a CNC-controlled guillotine shear for metal can remove the element of human error from the production process. Modern hydraulic guillotine shears ensure consistency and accuracy, as well as a fast and efficient manufacturing process.

Guillotine shears are available in a wide range of sizes. Whether you are using a used plate shear or a brand new hydraulic system, sheet metal can now be cut with pinpoint precision. This makes the production of sheet metal plates cost-effective for operations of all sizes. The plates created are used for the construction of industrial machinery, structures and spare parts.

A plate shearing machine is suitable for cutting simple sheet metal, as well as non-ferrous metals like brass, bronze and aluminium. These metals can be cut as long as 15 metres, making them suitable for a wide range of manufacturing processes. Unfortunately, stainless steel is usually unsuitable for cutting with guillotine shears because of its tendency to strain-harden.

At Surplex, we are constantly looking for used metalworking machinery to help businesses of all sizes save money. If you need to buy a conventional or CNC guillotine shear, you can save a significant amount of money by regularly checking Surplex.com for a quality guillotine shear for sale. By purchasing a used guillotine shear from a respected guillotine shears manufacturer such as TRUMPF, FISCHER, ATLANTIC, IRLE or SAFAN, you can ensure quality and precision whilst keeping capital expenditure to a minimum.